1966 Chevrolet C10

1966 Chevrolet C10 race truck for sale in our Detroit Showroom. This beautiful C10 for sale has been completely rebuild and modified for the track! In the engine bay sits a monster 383 stroker with tons of upgrades including: 4 bolt main block, Eagle crank, Eagle SIR rods, Keith Black pistons, 11.5:1 compression, World Products Sportsman II heads, Comp Cams springs, port matched to the Weiand tunnel ram intake, dual quad carburetor setup of Edelbrock Performers, MSD Pro Billet distributor, MSD digital 6AL ignition controller, Holley 750 GPH mechanical fuel pump, Hooker headers, Milodon 7 quart oil pan, Moroso oil accumulator, and Comp Cams camshaft with .555 lift and .295 duration! The transmission is a TCI Turbo 350 automatic with a Hughes 4,000 stall, reverse valve body, trans brake, and Hurst Quarter Stick shifter with solenoid control and line lock. The rear end is a 12 bolt with Moser spool, 4.56 gears, Moser axle shafts, and C clip eliminators. This custom race truck is lowered 6” in the rear, 4” in the front, and is chopped 3.5”. It has reinforced trailing arms, and a panhard bar, Weld Draglite wheels with Hoosier 10.5” slicks and Moroso 4.5” in front. The side and back glass has been replaced with Lexon and anything not necessary to racing has been removed to shave weight. Inside there is a 10 point roll cage, 1 racing seat (comes with tracks to raise it if needed), Auto Meter gauges, and custom dash. Other upgrades include Optima Yellow battery, battery cut off, battery box mounted in bed, 15 gallon fuel cell, aluminum bed floor, and a beautiful show quality paint job. This truck will certainly get you noticed at the track or at shows! This 66 C10 for sale runs in the 11’s with 1.5 second 60 foot time and weighs right at 3,040 pounds. Located in our Detroit Showroom, this 1966 Chevy C10 for sale can be seen at www.GatewayClassicCars.com, or call 313-982-3100 for additional information.